{"title":"Track \u0026 Crawler Loader Decal Kits","description":"\u003cp\u003eReplacement decal kits for track and crawler loaders. Find the graphics for your machine model and review the exact kit contents on the product page.\u003c\/p\u003e","products":[{"product_id":"caterpillar-953d-track-loader-decal-kit","title":"Caterpillar 953D Track Loader Decal Kit","description":"\u003cp\u003eRefresh your Caterpillar 953D track loader with this five-piece replacement decal kit. The set brings together paired 953D model panels, paired CAT panels and an outline CATERPILLAR wordmark in the black and red design shown.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e5 decals, supplied as one kit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 black and red 953D model panels\u003c\/li\u003e\n\u003cli\u003e2 black and red CAT logo panels\u003c\/li\u003e\n\u003cli\u003e1 outline CATERPILLAR wordmark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included graphics are the individual pieces shown in the product photo. The promotional header and background are not decals; the display is not to scale.\u003c\/p\u003e\u003ch2\u003eCompatibility and fit\u003c\/h2\u003e\u003cp\u003eFor the Caterpillar 953D track loader graphic layout shown. Not a 953C, 953K or wheel-loader set. Match the shapes of both the model panels and CAT panels to your machine.\u003c\/p\u003e\u003cp\u003eConfirm the model, existing artwork, panel shapes and required dimensions before ordering. For a fit check, email your model, year, panel measurements and clear machine photos to \u003ca href=\"mailto:quebecdecalstore@gmail.com\"\u003equebecdecalstore@gmail.com\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eBuilt for outdoor equipment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIndustrial-grade adhesive vinyl with a protective laminate.\u003c\/li\u003e\n\u003cli\u003eUV-, water- and weather-resistant finish.\u003c\/li\u003e\n\u003cli\u003ePrecision-cut replacement graphics for a clean restoration.\u003c\/li\u003e\n\u003cli\u003e5-year warranty, subject to the store's warranty terms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and care\u003c\/h2\u003e\u003cp\u003eRemove old decals and adhesive residue, then clean and dry the surface thoroughly. Apply to sound, fully cured paint and follow our \u003ca href=\"\/ar\/pages\/decal-installation-guide\"\u003edecal installation guide\u003c\/a\u003e. Avoid damaged paint, grease and loose coatings.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/ar\/collections\/aftermarket-heavy-equipment-decal-kits\"\u003eall replacement decal kits\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eAftermarket replacement product by QuébecDecalStore. Not an OEM part. Caterpillar and CAT names and logos identify the intended application; QuébecDecalStore is not affiliated with or endorsed by the original equipment manufacturer.\u003c\/small\u003e\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48113497014428,"sku":"QDS-CAT-953D-KIT","price":258.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/caterpillar-953d-track-loader-decal-kit-qds.jpg?v=1792870357"},{"product_id":"develon-dtl30-compact-track-loader-decal-kit","title":"Develon DTL30 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the appearance of your \u003cstrong\u003eDevelon DTL30 compact track loader\u003c\/strong\u003e with aftermarket replacement brand and model graphics in the style shown. Ideal after repainting or replacing worn machine markings.\u003c\/p\u003e\u003ch2\u003eIncluded graphics\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 × DEVELON side brand graphics, in the shapes shown.\u003c\/li\u003e\n\u003cli\u003e2 × DTL30 model graphics.\u003c\/li\u003e\n\u003cli\u003e1 × additional DEVELON brand graphic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOnly the machine graphics listed above are included. Safety labels are not included in this set. The QDS presentation background, watermarks and benefit icons are not supplied as machine decals.\u003c\/p\u003e\u003ch2\u003eIndustrial-grade laminated vinyl\u003c\/h2\u003e\u003cp\u003eExterior self-adhesive vinyl with a protective laminate, designed for outdoor equipment. Waterproof and resistant to weather and UV exposure. Supplied as printed vinyl graphics; no raised or metal emblems.\u003c\/p\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eMatch the graphic style shown to your machine. Please provide the year, serial number if available, clear machine photos and the dimensions of the markings being replaced so we can confirm the layout before production. The display image is not a dimensional drawing.\u003c\/p\u003e\u003ch2\u003eProduction, shipping and warranty\u003c\/h2\u003e\u003cp\u003eMade to order. Normal production time: 5–10 business days after payment and confirmation of the required details. Shipping is available across Canada, the USA and internationally; rates and applicable taxes are calculated at checkout. Covered by QuébecDecalStore's 5-year warranty; contact us for coverage details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAftermarket replacement product.\u003c\/strong\u003e Manufacturer names and model references identify compatibility only. QuébecDecalStore is not affiliated with or endorsed by the original equipment manufacturer.\u003c\/p\u003e\u003cp\u003eQuestions? \u003ca href=\"mailto:quebecdecalstore@gmail.com\"\u003equebecdecalstore@gmail.com\u003c\/a\u003e\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48222397268124,"sku":"QDS-DEVELON-DTL30-KIT","price":348.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-develon-dtl30-compact-track-loader-decal-kit.jpg?v=1793607523"},{"product_id":"develon-dtl26-compact-track-loader-decal-kit","title":"Develon DTL26 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the appearance of your \u003cstrong\u003eDevelon DTL26 compact track loader\u003c\/strong\u003e with aftermarket replacement brand and model graphics in the style shown. Ideal after repainting or replacing worn machine markings.\u003c\/p\u003e\u003ch2\u003eIncluded graphics\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 × DEVELON side brand graphics, in the shapes shown.\u003c\/li\u003e\n\u003cli\u003e2 × DTL26 model graphics.\u003c\/li\u003e\n\u003cli\u003e1 × additional DEVELON brand graphic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOnly the machine graphics listed above are included. Safety labels are not included in this set. The QDS presentation background, watermarks and benefit icons are not supplied as machine decals.\u003c\/p\u003e\u003ch2\u003eIndustrial-grade laminated vinyl\u003c\/h2\u003e\u003cp\u003eExterior self-adhesive vinyl with a protective laminate, designed for outdoor equipment. Waterproof and resistant to weather and UV exposure. Supplied as printed vinyl graphics; no raised or metal emblems.\u003c\/p\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eMatch the graphic style shown to your machine. Please provide the year, serial number if available, clear machine photos and the dimensions of the markings being replaced so we can confirm the layout before production. The display image is not a dimensional drawing.\u003c\/p\u003e\u003ch2\u003eProduction, shipping and warranty\u003c\/h2\u003e\u003cp\u003eMade to order. Normal production time: 5–10 business days after payment and confirmation of the required details. Shipping is available across Canada, the USA and internationally; rates and applicable taxes are calculated at checkout. Covered by QuébecDecalStore's 5-year warranty; contact us for coverage details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAftermarket replacement product.\u003c\/strong\u003e Manufacturer names and model references identify compatibility only. QuébecDecalStore is not affiliated with or endorsed by the original equipment manufacturer.\u003c\/p\u003e\u003cp\u003eQuestions? \u003ca href=\"mailto:quebecdecalstore@gmail.com\"\u003equebecdecalstore@gmail.com\u003c\/a\u003e\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48222397956252,"sku":"QDS-DEVELON-DTL26-KIT","price":348.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-develon-dtl26-compact-track-loader-decal-kit.jpg?v=1793607526"},{"product_id":"gehl-rt175-compact-track-loader-decal-kit","title":"GEHL RT175 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL RT175\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Early model tower assembly right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Early model tower assembly left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × Swoosh graphics, left and right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL arm logo — 45.72 × 10.74 cm (18 × 4.23 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eEarly RT175 graphic style; later replacement tower and arm graphics are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226589966492,"sku":"QDS-H400-013","price":210.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-rt175-aftermarket-decal-kit.png?v=1793639683"},{"product_id":"gehl-rt185-compact-track-loader-decal-kit","title":"GEHL RT185 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL RT185\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Later tower graphic right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Later tower graphic left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × RT185 model lettering — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL black lift-arm logo — 49.53 × 10.59 cm (19.5 × 4.17 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL glass\/front logo — 27.1 × 8.1 cm (10.67 × 3.19 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e3 × GEHL cab logos, sides and rear (printed appearance) — 17.78 × 3.81 cm (7 × 1.5 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eLater RT185 graphic style; the earlier swoosh-style panels are excluded. Confirm the serial number and current panel shapes.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590064796,"sku":"QDS-H400-014","price":206.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-rt185-aftermarket-decal-kit.png?v=1793639689"},{"product_id":"gehl-rt210-compact-track-loader-decal-kit","title":"GEHL RT210 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL RT210\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Early model tower assembly right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Early model tower assembly left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × Swoosh graphics, left and right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL arm logo — 45.72 × 10.74 cm (18 × 4.23 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eEarly RT210 graphic style; later replacement tower and arm graphics are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590261404,"sku":"QDS-H400-015","price":231.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-rt210-aftermarket-decal-kit.png?v=1793639698"},{"product_id":"gehl-rt250-compact-track-loader-decal-kit","title":"GEHL RT250 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL RT250\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Early model tower assembly right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Early model tower assembly left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × Swoosh graphics, left and right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL arm logo — 45.72 × 10.74 cm (18 × 4.23 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eEarly RT250 graphic style; later replacement tower and arm graphics are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590752924,"sku":"QDS-H400-016","price":231.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-rt250-aftermarket-decal-kit.png?v=1793639707"},{"product_id":"gehl-ctl60-compact-track-loader-decal-kit","title":"GEHL CTL60 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL60\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo - left\/right — 50.8 × 12.06 cm (20 × 4.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front chassis logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear ROPS\/cab logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eCTL60 decorative layout from manual 908307 revision H; confirm side-panel shapes and measurements.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590785692,"sku":"QDS-H400-019","price":222.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl60-aftermarket-decal-kit.png?v=1793639718"},{"product_id":"gehl-ctl70-compact-track-loader-decal-kit","title":"GEHL CTL70 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL70\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo - left\/right — 59.69 × 13.97 cm (23.5 × 5.5 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front chassis logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear ROPS\/cab logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eCTL70 decorative layout from manual 908307 revision H; confirm side-panel shapes and measurements.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590818460,"sku":"QDS-H400-020","price":225.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl70-aftermarket-decal-kit.png?v=1793639718"},{"product_id":"gehl-ctl80-compact-track-loader-decal-kit","title":"GEHL CTL80 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL80\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo - left\/right — 64.77 × 15.24 cm (25.5 × 6 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front chassis logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear ROPS\/cab logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eCTL80 decorative layout from manual 908307 revision H; confirm side-panel shapes and measurements.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590851228,"sku":"QDS-H400-021","price":226.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl80-aftermarket-decal-kit.png?v=1793639722"},{"product_id":"gehl-ctl85-compact-track-loader-decal-kit","title":"GEHL CTL85 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL85\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel + stripe assembly - left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo - left\/right — 64.77 × 15.24 cm (25.5 × 6 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL front chassis logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL white rear ROPS\/cab logo — 40.44 × 9.53 cm (15.92 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eCTL85 decorative layout from manual 917301; confirm side-panel shapes and measurements.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226590883996,"sku":"QDS-H400-022","price":226.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl85-aftermarket-decal-kit.png?v=1793639731"},{"product_id":"gehl-ctl75-compact-track-loader-decal-kit","title":"GEHL CTL75 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL75\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Right panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Left panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × White GEHL rear logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Dark GEHL front logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo — 51.21 × 12.06 cm (20.16 × 4.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL control-box badge — Width and height to confirm before production.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eSelected CTL75 manual layout; TWO-SPEED and Air-Conditioned option decals are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226593144988,"sku":"QDS-H400-046","price":225.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl75-aftermarket-decal-kit.png?v=1793639871"},{"product_id":"mustang-2550rt-compact-track-loader-decal-kit","title":"Mustang 2550RT Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eMustang 2550RT\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Black front logo — 31.12 × 8.41 cm (12.25 × 3.31 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e4 × Cab graphic strip — 51.61 × 3.23 cm (20.32 × 1.27 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e2 × Lift-arm logo — 47.04 × 5.69 cm (18.52 × 2.24 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e2 × BY MANITOU lift-arm lettering — 41.73 × 5.79 cm (16.43 × 2.28 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Graphic 2550RT left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Graphic 2550RT right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e4 × PILOT SERIES — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e2 × IdealTrax — Width and height to confirm before production.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eMustang by Manitou graphics; compare generation and serial number before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226594914460,"sku":"QDS-H400-061","price":208.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-mustang-2550rt-aftermarket-decal-kit.png?v=1793639973"},{"product_id":"gehl-ctl65-compact-track-loader-decal-kit","title":"GEHL CTL65 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL65\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Right panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Left panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × White GEHL rear logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Dark GEHL front logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo — 51.21 × 12.06 cm (20.16 × 4.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL control-box badge — Width and height to confirm before production.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eSelected CTL65 manual layout; TWO-SPEED and Air-Conditioned option decals are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226595045532,"sku":"QDS-H400-064","price":225.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl65-aftermarket-decal-kit.png?v=1793639984"},{"product_id":"gehl-ctl55-compact-track-loader-decal-kit","title":"GEHL CTL55 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eGEHL CTL55\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Right panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Left panel and stripe assembly — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × White GEHL rear logo — 40.64 × 9.53 cm (16 × 3.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Dark GEHL front logo — 21.59 × 5.08 cm (8.5 × 2 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e2 × GEHL lift-arm logo — 51.21 × 12.06 cm (20.16 × 4.75 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × GEHL control-box badge — Width and height to confirm before production.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eSelected CTL55 manual layout; TWO-SPEED and Air-Conditioned option decals are excluded.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226595143836,"sku":"QDS-H400-065","price":223.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-gehl-ctl55-aftermarket-decal-kit.png?v=1793639994"},{"product_id":"bobcat-t64-compact-track-loader-decal-kit","title":"Bobcat T64 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat T64\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Left rear upright graphic T64 — 48.62 × 54.58 cm (19.14 × 21.49 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Right rear upright graphic T64 — 48.62 × 54.58 cm (19.14 × 21.49 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Left lift-arm logo — 83.57 × 16.69 cm (32.9 × 6.57 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Small Bobcat wordmark — 22.91 × 3.86 cm (9.02 × 1.52 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Small lift-arm logo — 23.06 × 6.68 cm (9.08 × 2.63 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Bobcat head emblem — 17.86 × 18.44 cm (7.03 × 7.26 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Right lift-arm logo — Width 83.57 cm (32.9 in); height to confirm; conflicting source heights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226595307676,"sku":"QDS-H400-068","price":207.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-t64-aftermarket-decal-kit.png?v=1793640005"},{"product_id":"bobcat-t7x-compact-track-loader-decal-kit","title":"Bobcat T7X Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat T7X\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel T7X left — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel T7X right — Width and height to confirm before production.\u003c\/li\u003e\n\u003cli\u003e1 × Narrow Bobcat badge — 22.91 × 3.86 cm (9.02 × 1.52 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Tall Bobcat badge — 23.06 × 6.68 cm (9.08 × 2.63 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226596192412,"sku":"QDS-H400-079","price":190.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-t7x-aftermarket-decal-kit.png?v=1793640075"},{"product_id":"bobcat-t110-compact-track-loader-decal-kit","title":"Bobcat T110 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat T110\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 × Model panel T110 — 34.8 × 28.19 cm (13.7 × 11.1 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × White rear-cover logo — 84.66 × 24.38 cm (33.33 × 9.6 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226598158492,"sku":"QDS-H400-091","price":181.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-t110-aftermarket-decal-kit.png?v=1793640153"},{"product_id":"bobcat-t180-compact-track-loader-decal-kit","title":"Bobcat T180 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat T180\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 × Model panel T180 — 34.8 × 28.19 cm (13.7 × 11.1 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Bobcat head emblem — 17.6 × 17.58 cm (6.93 × 6.92 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Black Bobcat wordmark — 25.63 × 8.66 cm (10.09 × 3.41 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × White rear-cover logo — 84.66 × 24.38 cm (33.33 × 9.6 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226598256796,"sku":"QDS-H400-092","price":184.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-t180-aftermarket-decal-kit.png?v=1793640163"},{"product_id":"bobcat-t250-compact-track-loader-decal-kit","title":"Bobcat T250 Compact Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat T250\u003c\/strong\u003e compact track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 × Model panel T250 — 34.8 × 28.19 cm (13.7 × 11.1 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × Bobcat head emblem — 17.6 × 17.58 cm (6.93 × 6.92 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × Black Bobcat wordmark — 25.63 × 8.66 cm (10.09 × 3.41 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003cli\u003e1 × White rear-cover logo — 84.66 × 24.38 cm (33.33 × 9.6 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226598322332,"sku":"QDS-H400-093","price":184.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-t250-aftermarket-decal-kit.png?v=1793640166"},{"product_id":"bobcat-mt52-mini-track-loader-decal-kit","title":"Bobcat MT52 Mini Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat MT52\u003c\/strong\u003e mini track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Model panel MT52 — 43.56 × 16.38 cm (17.15 × 6.45 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × Model panel MT52 opposite side — 43.56 × 16.38 cm (17.15 × 6.45 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × Logo Bobcat — 29.72 × 9.4 cm (11.7 × 3.7 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226598879388,"sku":"QDS-H400-099","price":167.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-mt52-aftermarket-decal-kit.png?v=1793640204"},{"product_id":"bobcat-mt55-mini-track-loader-decal-kit","title":"Bobcat MT55 Mini Track Loader Decal Kit","description":"\u003cp\u003eRefresh the identification graphics on your \u003cstrong\u003eBobcat MT55\u003c\/strong\u003e mini track loader with this aftermarket decorative decal kit from QuébecDecalStore. Supplied as physical decals in \u003cstrong\u003e3M Scotchcal vinyl with a protective laminate\u003c\/strong\u003e for outdoor equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to the confirmed layout:\u003c\/strong\u003e final dimensions and compatibility must be checked before fabrication. Some sizes below are nominal or unconfirmed; the preview does not establish an exact fit.\u003c\/p\u003e\u003ch2\u003eSelected graphics and reference sizes\u003c\/h2\u003e\u003cp\u003eThe list below defines this QDS decorative selection, not a complete original-manufacturer decal inventory. Quantities refer to the listed graphics or assemblies; one panel assembly may contain separate vinyl sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × MT55 model panel, one side — 48.13 × 19.68 cm (18.95 × 7.75 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × MT55 model panel, opposite side — 48.13 × 19.68 cm (18.95 × 7.75 in), width × height; nominal source dimensions; width\/height orientation interpreted, to confirm.\u003c\/li\u003e\n\u003cli\u003e1 × Bobcat logo — 29.72 × 9.4 cm (11.7 × 3.7 in), width × height; nominal source dimensions, not machine-verified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and production check\u003c\/h2\u003e\u003cp\u003eConfirm the machine generation, serial number and original graphic layout before production.\u003c\/p\u003e\u003cp\u003eBefore production, provide photos of both sides and the rear, the model\/serial details, and measurements of the decal areas. We will confirm the final layout and sizes with you. Published sizes are nominal references; interpreted axes and missing measurements are identified above. No ±1–2 cm fit tolerance is guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecorative graphics only:\u003c\/strong\u003e safety warnings, operating instructions, load charts, certification labels, serial plates and unlisted optional-equipment decals are excluded. Keep all original safety and identification labels in place. Printed colour effects do not imply metallic or reflective material.\u003c\/p\u003e\u003cp\u003eThe product image is an illustrative preview, not a dimensioned cutting template. This is an aftermarket QDS product, not a genuine OEM kit. Brand names, model names and reference numbers are used only to identify the intended application.\u003c\/p\u003e","brand":"QuébecDecalStore","offers":[{"title":"Default Title","offer_id":48226599010460,"sku":"QDS-H400-100","price":170.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/files\/qds-bobcat-mt55-aftermarket-decal-kit.png?v=1793640210"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4394\/7164\/collections\/caterpillar-953d-track-loader-decal-kit-qds.jpg?v=1793562337","url":"https:\/\/quebecdecalstore.com\/ar\/collections\/track-crawler-loader-decal-kits.oembed","provider":"QuébecDecalStore","version":"1.0","type":"link"}